If you have Wenlin on a CD-ROM, you can run it directly from the CD-ROM, without any installation. If you’re just getting started, you could postpone installation until after you’ve had a chance to use Wenlin for a while. The Wenlin Tutorial is the best way to start.
Here are instructions for installation. If you’re not in too much of a hurry, it might be a good idea to read the remainder of this section before actually installing.
Complete installation requires about half a gigabyte of room on a hard drive. Installation of sound files is optional. Without sounds, installation requires considerably less disk space. For the precise requirements, see System Requirements.
The instructions are different for MS-Windows and Macintosh.
Upgrading from an Earlier Version
If you used an earlier version of Wenlin, and you made changes to any of the dictionary files, you may want to preserve those changes, and be able to use them with the newest version. It is possible to run Wenlin 3 and Wenlin 4 on the same computer without interference. You may find this convenient especially while making the transition. It is not necessary to uninstall Wenlin 3 before installing Wenlin 4, so don't be in too much of a hurry about uninstalling.
Also, the “W3Sound” folder that came with Wenlin 3 can be used for Wenlin 4, so you might save time and/or disk space if you don't delete your old “W3Sound” folder.
Wenlin 4.1 uses a different name for its data folder than 4.0, by default. For 4.0, the folder is named “Wenlin4”, while for 4.1 it is named “WenlinTushuguan”. (Note: túshūguǎn 图书馆[圖書館] means ‘library’.) When you update from 4.0 to 4.1, your older dictionary files will not be replaced, in case you have made changes to them.
There is more information about this in Appendix C. For now, you might just leave Wenlin 3 alone and go ahead and install Wenlin 4.
- • Agree to the license in Appendix D
- • Quit Wenlin if it’s already running
- • Double-click on the Setup (or Setup.exe) icon on the CD-ROM, or the installation file you downloaded
- • Follow the on-screen instructions for the setup program
- You’ll be prompted to choose locations for the program and data or accept the default locations, and choose whether to install optional files
- You may be prompted to enter an administrative password
- • If you have obtained the Wenlin sound files separately from the installer, see below for additional instructions
- • Eject the CD-ROM when the installation is complete (if using a CD-ROM)
The program location is where the program itself (“wenlin.exe”) will be installed. The default program location on most systems will be “C:\Program Files\Wenlin4” (or the equivalent in another language). We recommend using the default unless you really know what you're doing and have a good reason to choose a different location. Remember the location; you may want to navigate to this location later to install updated versions, etc.
The data location (also known as the “tushuguan”) is where Wenlin's data files (dictionaries, fonts, texts, documentation, sounds, etc.) will be installed. The default data location on most systems will be inside the Public Documents folder; where that is depends on your MS-Windows version and configuration. Wenlin 4.1 uses a different name for the data location (“WenlinTushuguan”) than Wenlin 4.0 (“Wenlin4”). On Windows 7 and Vista, it might be:
- C:\Users\Public\Documents\Wenlin4 (for Wenlin 4.0)
- C:\Users\Public\Documents\WenlinTushuguan (for Wenlin 4.1)
On Windows XP, it might be:
- C:\Documents and Settings\All Users\Documents\Wenlin4 (for Wenlin 4.0)
- C:\Documents and Settings\All Users\Documents\WenlinTushuguan (for Wenlin 4.1)
The setup program automatically adds a shortcut so you can start Wenlin by clicking on Start, Programs, Wenlin. When Wenlin is running, you can find its data folder by choosing Open Wenlin Folder in Explorer from the File menu.
If you have obtained the Wenlin sound files separately from the installer, in a file named “wenlinsounds.zip” or a folder named “W3Sound”, you can install them as follows:
- • If you have “wenlinsounds.zip”, double-click it to unzip it and obtain the “W3Sound” folder
- • Start Wenlin
- • Choose Open Wenlin Folder in Explorer from the File menu
- The “Wenlin4” or “WenlinTushuguan” folder will be displayed in Windows Explorer
- • In Windows Explorer, find the “W3Sound” folder and drag it into the “Wenlin4” or “WenlinTushuguan” folder
- • Agree to the license in Appendix D
- • Quit Wenlin if it is already running
- • Find the folder named “Wenlin4” (for Wenlin version 4.0) or “WenlinTushuguan” (for Wenlin version 4.1 ) on the CD-ROM or in the installation disk image
- • Decide on the destination folder
The destination folder can be any folder on the hard drive you would like. We recommend the folder named “Applications”.
- • Find the destination folder
- • Drag the '“Wenlin4” or “WenlinTushuguan” folder icon to the destination folder
- Copying the files may take a few minutes
- • Make the new “Wenlin4” or “WenlinTushuguan” folder icon visible (if it isn’t already)
- (Double-click on the destination folder and scroll if necessary)
- • Drag the “W3Sound” folder icon to the new “Wenlin4” or “WenlinTushuguan” folder
- Copying the sound files may take quite a while
- (This step can be omitted if you don’t need sound)
- • Eject the CD-ROM by dragging its icon to the trash (if using a CD-ROM)
You might want to do one more thing: add an icon on the Dock, so you’ll be able to start Wenlin without having to open the “Wenlin4” folder:
- • Find the Wenlin application icon
- It will be inside the new “Wenlin4” or “WenlinTushuguan” folder
- • Drag the icon to the Dock
When Wenlin is running, you can find the folder in which you installed it (the “tushuguan”) by choosing Open Wenlin Folder in Finder from the File menu.
How to Un-install (Remove) Wenlin
Before un-installing, be sure to make backup copies of any texts or dictionary files, if anybody has made any additions or changes that they would be sorry to lose permanently. If you don’t know how to make backups, obtain help. The following instructions cause the permanent deletion of files.
For Macintosh, simply quit Wenlin and drag the “Wenlin4” or “WenlinTushuguan” folder to the Trash.
For MS-Windows, use the standard MS-Windows method of un-installing: quit Wenlin; click on Start, Settings, Control Panel, Add/Remove Programs; select Wenlin, and press the button for removing it. If changes have been made within the Wenlin folders, it’s possible that some files and folders will not be removed by the un-installer, in which case you can drag any files that remain to the Recycling Bin.
Benefits of Installation
The following applies if you have a Wenlin CD-ROM. (Otherwise you need to install Wenlin in order to run it.)
It may be more convenient not to keep the disc inserted all the time; you could put it somewhere safe where it won’t get scratched or dirty. (And then you can use the CD drive for playing music, etc.)
Because a CD-ROM is a “Read-Only Memory,” you can only read it, you can’t write new information on it. Wenlin enables you to make dictionary changes and additions, but only after the dictionary files are installed on a hard drive (or other writable media).
Hard drives are usually faster than CD-ROMs, so Wenlin should run faster after installation.
What is a Hard Drive?
Here are few notes of clarification for people with less technical experience.
A hard drive, or hard disk, is where your computer generally stores files (documents, programs, etc.). Since a hard drive is usually hidden inside a computer, it may seem mysterious. A hard drive is similar to removable media like diskettes, but it’s not removable, and it’s generally faster and holds more data. Unlike a CD-ROM, a hard drive allows both reading and writing. New forms of writable media keep being invented, which are essentially equivalent to hard drives if they are fast enough and hold enough data. Some media are fast to read, but slow to write.
For MS-Windows, C: (the C drive) is nearly always a hard drive. D: might be another hard drive, or a CD-ROM drive, etc. (A: and B: are usually reserved for diskette drives.) Generally you can see the drive icons by clicking on a “My Computer” icon on the Desktop.
For Macintosh, the hard drive is often named “Macintosh HD” and located in the upper right-hand corner when you buy the computer, but most people change the name to something silly. It’s the one icon you really must have on your Desktop (besides the Trash).
What Installation Involves
Installing Wenlin is basically a matter of copying some files from the CD-ROM (if you received it on a CD-ROM) to the hard drive.
In fact, for Macintosh, that’s all there is to it. Optionally you can drag the Wenlin application icon to the Dock.
For MS-Windows, there are some complications involving the Start menu, the infamous read-only attribute, and the mysterious Registry (an operating system database where programs are supposed to store information about where they’re installed and how they can be un-installed, as well as user preferences). So, the Wenlin CD-ROM has a Setup program (Setup.exe) to accomplish MS-Windows installation.
More information about the folders and files that are installed for Wenlin is presented in Appendix C.